The main chimney will be used to exhaust the hot flue from the wood pellet furnace/boiler. In the short term the wood pellet furnace will be the main source of energy for hot water and radiant heating. In the long term, it will be combined to solar panels.

The chimney starts in the upper cellar and goes all the way up to almost the top of the roof. The conduit is built with pre-fabricated clay blocks that clip ontop one another. The conduit was half embedded in the stone wall so it would not protrude too much inside the house.

For a chimney to work well, its top needs to be at the same level or slightly above the rooftop. The portion of the chimney conduit that is outside the house, on the roof, will be covered with stones so it is protected and blends with the rest of the house.

We had to get smaller stones, which we found at a nearby stone field for this work.

The small slanted slates one can see around the base of the chimney (on the roof) is to direct rain water away from the base of the chimney, which is always a weak point or junction.